Product Description

Capacity Range upto **0 KVA, 3 Ph         

Power distribution unit is fitted with multiple

outputs designed to distribute electrical

power.

In a data centre, all the distributed power

loads are connected through a non linear

power source, due to which HARMONICS

generation is unavoidable. These generated

Harmonics are flow back and directly effects

the mains power source, which a UPS. The

effect of harmonics de-rates the capacity of

UPS. Hence **0% utilization of UPS capacity

becomes wasted. The effect of harmonics

also creates much heat in the transformers of

UPS.

To eliminate these direct effects on UPS, KFactor

transformers are designed. K factor

transformers are designed based on the

harmonics present the load. The special

design of K Factor transformer helps us to

depend on much to eliminate or withstanding

from the effects of Harmonics.

 Transformer

• Double wound , High Isolation.

• Double sized neutral.

• Insulation class “H”.

• Regulation is better than 3.5%.

• Overload rating of **0% for *0

secs.

• Core of CRGO and conductor of

copper.

• Natural / Forced Air Cooled.

• As per IS:***6 standards.

• Attenuation: *0 db CMRR and *0

db CMNR.

• Primary connect as DELTA,

secondary connection as STAR.

• Efficiency of the transformer is

minimum *8%.

Technical Specifications

2 Power Distribution

• Floor mounting Panel board with MS

angles and Ms sheets with powder

coated Paint and suitable provisions for

cable.

• Distributed outgoing through sub

branch breakers and branch breakers.

• Extra sub breakers also provided.

• Suitable capacity 4 pole incomer.

3 Metering & Indications

• LED indications provided to read the

availability of incoming supply.

• Multi parameter reading meter to read

Voltages, currents and power is

incorporated.

4. Capacity available:

*0 KVA to **0 KVA.

(*0,*5,**0,**0,**0,**0,**0,**0,**0).

Most suitable for:Data Centres, Telecom

Quality Process Certification:    National and International standards including IS,IEC,ANSI,BS,DIN